Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 4 subscribers
  • Views 7746 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SOPHOS UTM 9 Ethernet interface doesnt get Address trough PPPOE from Draytek 2960. Interface Stays DOWN

Stephan de Meulmeester

Hello There.

 

My SOPHOS UTM 9.0 is not able to get an IP address trough PPPOE session from an draytek 2960. when i put a BRIDGED Draytek between the devices it works perfectly.

I van see that the PPPOE Session is setting up correctly.  But the DHCP Address from the Draytek PPPOE server doesnt get applied on the Sophos interface.

 

Does somebody have an idea? Regards,

 

Stephan



This thread was automatically locked due to age.
Parents Reply
  • 0 in reply to Stephan de Meulmeester

    Hi Stephan,

    I had an issue similar to this with my Home edition, I got around it by configuring the interface for 1Gbs instead of auto negotiation. Never found out why.

     

    hope this helps

    XG & UTM Architect (Systems: XG v18 & UTM 9.7 - Virtual, HW & SW)
    Curious enough to take it apart, skilled enough to put it back together, Clever enough to hide the extra parts when I'm Done!

Children
Unfiltered HTML