This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IPSEC configuration.

Hi, I got task to configure and build IPSEC between my HQ and my branch. My HQ using Fortigate and my branch using Sophos UTM 9. I'd try to create and configure Site-to-site IPSEC but still failed. Anyone can help me?

This thread was automatically locked due to age.

Parents

0 zaphod over 7 years ago

Old article but helped me some years ago using a forti60b

https://community.sophos.com/kb/en-us/116130

if you get tunnel running with this "unsecure" settings.. try to use better encryption like aes256 and shorter timings for phase2

greets

zaphod
___________________________________________

Home: Zotac CI321 (8GB RAM / 120GB SSD) with latest Sophos UTM
Work: 2 SG430 Cluster / many other models like SG105/SG115/SG135/SG135w/...
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 zaphod over 7 years ago

Old article but helped me some years ago using a forti60b

https://community.sophos.com/kb/en-us/116130

if you get tunnel running with this "unsecure" settings.. try to use better encryption like aes256 and shorter timings for phase2

greets

zaphod
___________________________________________

Home: Zotac CI321 (8GB RAM / 120GB SSD) with latest Sophos UTM
Work: 2 SG430 Cluster / many other models like SG105/SG115/SG135/SG135w/...
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data