Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 4 subscribers
  • Views 5137 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IPSEC configuration.

TripleM Capsm

Hi, I got task to configure and build IPSEC between my HQ and my branch. My HQ using Fortigate and my branch using Sophos UTM 9. I'd try to create and configure Site-to-site IPSEC but still failed. Anyone can help me?



This thread was automatically locked due to age.
  • 0

    do you have some logfiles?

    is NAT between ISP and Sophos or Fortigate?

    do you use the same parameters at booth sides? Possible to post screenshots?


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

  • 0

    Old article but helped me some years ago using a forti60b

    https://community.sophos.com/kb/en-us/116130

    if you get tunnel running with this "unsecure" settings.. try to use better encryption like aes256 and shorter timings for phase2

     

     

    greets

    zaphod
    ___________________________________________

    Home: Zotac CI321 (8GB RAM / 120GB SSD)  with latest Sophos UTM
    Work: 2 SG430 Cluster / many other models like SG105/SG115/SG135/SG135w/...

Unfiltered HTML