Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 4 subscribers
  • Views 3025 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

HA with software appliances

Alan Lehman

The documentation on configuring HA only discussing configuring with hardware appliances. Is it possible to do HA using UTM9 software installs? If so, do the hardware platforms have to be identical?



This thread was automatically locked due to age.
  • 0

    i use virtual software appliances.

    Works.

    While migration i have not the same hardware assignment.

    But you should have the same amount and speed of interfaces.


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

  • 0

    Hi, Alan, and welcome to the UTM Community!

    As Dirk says, the key is to have the same number and types of interfaces.  If you're going to try to make both instances run on the same piece of hardware, you will need to run the following command as root:

    cc set ha advanced virtual_mac 0

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    Thanks all for the responses. I think we'll give it a try and let you know what happens. Our plan is to use two physical servers.

Unfiltered HTML