Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 4 subscribers
  • Views 3026 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

HA with software appliances

Alan Lehman

The documentation on configuring HA only discussing configuring with hardware appliances. Is it possible to do HA using UTM9 software installs? If so, do the hardware platforms have to be identical?



This thread was automatically locked due to age.
Parents
  • 0

    Hi, Alan, and welcome to the UTM Community!

    As Dirk says, the key is to have the same number and types of interfaces.  If you're going to try to make both instances run on the same piece of hardware, you will need to run the following command as root:

    cc set ha advanced virtual_mac 0

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0

    Hi, Alan, and welcome to the UTM Community!

    As Dirk says, the key is to have the same number and types of interfaces.  If you're going to try to make both instances run on the same piece of hardware, you will need to run the following command as root:

    cc set ha advanced virtual_mac 0

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
Unfiltered HTML