I have an xubuntu based firewall with an onboard GigE NIC as the LAN interface, a 3Com 10/100 interface for the wan and a quad 10/100 card for a couple of other networks (I've not gone near those on UTM yet - so I think they can be ignored). [H/W is a P4 with 3GB RAM, 160GB HDD]
The ubuntu system runs PPPoE - and has done for over a year now - through a BT OpenReach 'modem', and a hand crafted iptables firewall and vpn connection to a VPS.
I've downloaded UTM today (ISO is 9.401-11.1) and replaced the HDD in the firewall to install UTM Home without splatting my existing firewall.
It installed happily, detecting and offering all of the network interfaces - so I set up the GigE NIC as the internal network and gave it an address - logged in over the WebUI and configured the PPPoE (VDSL, VLAN ID 101 as prescribed by my ISP - though not needed on the ubuntu AFAICT)
I get the following repeated in the logs:
2016:05:01-23:06:28 bragi pppd-pppoe[7438]: Plugin rp-pppoe.so loaded.
2016:05:01-23:06:28 bragi pppd-pppoe[7438]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.6
2016:05:01-23:06:28 bragi pppd-pppoe[7438]: pppd 2.4.6 started by root, uid 0
2016:05:01-23:06:28 bragi pppd-pppoe[7438]: Send PPPOE Discovery V1T1 PADI session 0x0 length 12
2016:05:01-23:06:28 bragi pppd-pppoe[7438]: dst ff:ff:ff:ff:ff:ff src 0:50:4:43:cd:c1
2016:05:01-23:06:28 bragi pppd-pppoe[7438]: [service-name] [host-uniq 0e 1d 00 00]
2016:05:01-23:06:33 bragi pppd-pppoe[7438]: Send PPPOE Discovery V1T1 PADI session 0x0 length 12
2016:05:01-23:06:33 bragi pppd-pppoe[7438]: dst ff:ff:ff:ff:ff:ff src 0:50:4:43:cd:c1
2016:05:01-23:06:33 bragi pppd-pppoe[7438]: [service-name] [host-uniq 0e 1d 00 00]
2016:05:01-23:06:43 bragi pppd-pppoe[7438]: Send PPPOE Discovery V1T1 PADI session 0x0 length 12
2016:05:01-23:06:43 bragi pppd-pppoe[7438]: dst ff:ff:ff:ff:ff:ff src 0:50:4:43:cd:c1
2016:05:01-23:06:43 bragi pppd-pppoe[7438]: [service-name] [host-uniq 0e 1d 00 00]
2016:05:01-23:07:03 bragi pppd-pppoe[7438]: Timeout waiting for PADO packets
2016:05:01-23:07:03 bragi pppd-pppoe[7438]: Unable to complete PPPoE Discovery
2016:05:01-23:07:03 bragi pppd-pppoe[7438]: Exit.
2016:05:01-23:07:03 bragi pppoe-sh: DSL connection time shorter than 60 seconds (35 sec): Error? - wait 5 seconds
Web searches haven't got me very far - either my google fu is weak or there are lots of subtle ways in which ISPs break things...
Clearly I'm an idiot - if I put the old HDD back in it fires up just fine and connects instantly. I just can't see what it is I'm meant to have done differently.
I'd really appreciate a pointer to help me figure out what on earth is going on in this system...
This thread was automatically locked due to age.
