This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SMTP Proxy setup: Newbie needs help

Hi folks.

I'm trying to setup SMTP proxy and I'm not sure I have the right idea, i.e. brain possibly in dense mode.

I'm tesing with domain byted.com and have it's MX record pointing to the ASL outside IP.

In ASL:
Accepting incoming domains: byted.com
Mail relay for: LAN (defined as the /24 of the local network)
SMTP routes: byted.com --> 192.168.2.155 (the IP on private LAN that hosts the RH 7.2 mail server (CommuniGatePro))

Do I have to do anything in the Packet Filter section?

Do I have the right idea and the problem is .155?

Thanks in advance for any insight you may be able to provide.

Heinz

This thread was automatically locked due to age.

Parents

0 grimphyre over 22 years ago

I can't imagine why it shouldn't work. I have quite similar configuration.
Cancel
Vote Up 0 Vote Down

Cancel
0 Heinz Wittenbecher over 22 years ago in reply to grimphyre

Thanks very much.

At least that confirms I have the ASL part right and I will look downstream. My major concern was that I didn't grasp the concept correctly as it's my first try at proxy stuff.

Thanks again

Heinz
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Heinz Wittenbecher over 22 years ago in reply to grimphyre

Thanks very much.

At least that confirms I have the ASL part right and I will look downstream. My major concern was that I didn't grasp the concept correctly as it's my first try at proxy stuff.

Thanks again

Heinz
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 Marius over 22 years ago in reply to Heinz Wittenbecher

Try to let the field "Accepted incoming domains:" be empty. What happends then?
Cancel
Vote Up 0 Vote Down

Cancel