Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 4 subscribers
  • Views 2443 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SNMP: No Response

Bert Boan

Trying to setup SNMP monitoring but Paessler SNMP Tester keeps returning Value: No response... SNMP error 2003

I have enabled the snmp agent and created a trap in Administration -> SNMP and also flipped the switch for SNMP traps in System services -> Notification list and turned on all the Notifications. Is there somewhere else I need to enable something to get the Sopos XG210 (SFOS 18.0.1 MR-1-Build396) to respond?



This thread was automatically locked due to age.
Parents
  • 0

    do you enable SNMP for the Source-Zone?

    Administration-> device access -> Local service ACL


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Reply
  • 0

    do you enable SNMP for the Source-Zone?

    Administration-> device access -> Local service ACL


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Children
No Data
Unfiltered HTML