This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SNMP: No Response

Trying to setup SNMP monitoring but Paessler SNMP Tester keeps returning Value: No response... SNMP error 2003

I have enabled the snmp agent and created a trap in Administration -> SNMP and also flipped the switch for SNMP traps in System services -> Notification list and turned on all the Notifications. Is there somewhere else I need to enable something to get the Sopos XG210 (SFOS 18.0.1 MR-1-Build396) to respond?

This thread was automatically locked due to age.

0 Amodin over 2 years ago

Might want to post this on the XG forums. You might have better luck there. :)

OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
(Former Sophos UTM Veteran, Former XG Rookie)
Cancel
Vote Up 0 Vote Down

Cancel
0 Bert Boan over 2 years ago in reply to Amodin

thanks, will do
Cancel
Vote Up 0 Vote Down

Cancel
0 dirkkotte over 2 years ago

do you enable SNMP for the Source-Zone?

Administration-> device access -> Local service ACL

Dirk

Systema Gesellschaft für angewandte Datentechnik mbH // Sophos Platinum Partner
Sophos Solution Partner since 2003
If a post solves your question, click the 'Verify Answer' link at this post.
Cancel
Vote Up 0 Vote Down

Cancel