Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 3 subscribers
  • Views 45618 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How do I create a Bridge, LTE (4G) to Ethernet?

nicnet

I have been using a Dovado Pro (in bridge mode) with a Huawei E3276 for some years and my internet connection use to drop up to 10 times/day.
Reconnecting took up to 10 min.

I just changed to UTM 9 and now my USB modem is quite stable.
Reconnecting only takes a couple of sec.

Next step is to bridge my Huawei E3276 to an Ethernet interface.
I can't seem to find a guide for this.

Just to clarify; the LTE connection is my only internet connection. This is not to be used as fail-over.

I have 2 unused Ethernet interfaces available thanks to the upgrade the other day.
StarTech.com part# USB31000SW
USB-to-Ethernet Gigabit based on ASIX AX88179.

Anyone?



This thread was automatically locked due to age.
Parents
  • 0
    Good enough. The context helps. Fairly easy to create a bridge. It's done at Interfaces & Routing > Bridging > Status. Enable bridging, select the interfaces that will be part of the bridge, then click the create bridge button. If you select an already configured interface for Convert Interface, the bridge will inherit the settings of that interface. I've never tried this and don't have an LTE USB to test with.
    __________________
    ACE v8/SCA v9.3

    ...still have a v5 install disk in a box somewhere.

    http://xkcd.com
    http://www.tedgoff.com/mb
    http://www.projectcartoon.com/cartoon/1
  • 0 in reply to Scott_Klassen
    I don't have the menu section "Bridging" under "Interfaces & Routing".
    Is this something not available in v. 9.351-3 (Home use only license)?

    Sub-sections under "Interfaces & Routing" are:
    Interfaces
    Quality of Service (QoS)
    Uplink Monitoring
    IPv6
    Static Routing
    Dynamic Routing (OSPF)
    Border Gateway Protocol
    Multicast Routing (PIM-SM)
Reply
  • 0 in reply to Scott_Klassen
    I don't have the menu section "Bridging" under "Interfaces & Routing".
    Is this something not available in v. 9.351-3 (Home use only license)?

    Sub-sections under "Interfaces & Routing" are:
    Interfaces
    Quality of Service (QoS)
    Uplink Monitoring
    IPv6
    Static Routing
    Dynamic Routing (OSPF)
    Border Gateway Protocol
    Multicast Routing (PIM-SM)
Children
No Data
Unfiltered HTML