Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 1 subscriber
  • Views 3915 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problems using host based smtp relay

HSP
Good morning everybody

We have troubles using the host based smtp relay on our ASG220 v9.207-19.

If i use 4 separated host entries it works fine, but using a range, it doesn't.

Example:

Host 1: 192.168.1.100
Host 2: 192.168.1.101
Host 3: 192.168.1.102
Host 4: 192.168.1.103

>Works.

Host Range 192.168.1.100 - 192.168.1.103
> Doesn't work.

Bug or Feature? Not supported?

Thanks for any assistance.


This thread was automatically locked due to age.
Parents
  • 0
    Did some more research and found out ranges were supported in Firmware 9.111 and later removed this feature in 9.250. However it is still possible to create a range, this is known and will be fixed in a next update.
Reply
  • 0
    Did some more research and found out ranges were supported in Firmware 9.111 and later removed this feature in 9.250. However it is still possible to create a range, this is known and will be fixed in a next update.
Children
No Data
Unfiltered HTML