Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 1 subscriber
  • Views 5287 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Send SMTP traffic through interface with static IP.

red_diablo2004
Hi all,

I have 2 Internet lines one with dynamic IP and the other with static IP, and I have Exchange Server and I want to send through Sophos UTM.

When sending SMTP from Exchange, the UTM sends this traffic through the interface with dynamic IP?

Is there any way to command the UTM to send throught the other interface?

And one more thing, can I resend the bounced emails that kept in the UTM?

And thanks in advance.

Regards,

Nabil Alwan


This thread was automatically locked due to age.
Parents
  • 0
    I guess that you have Uplink Balancing enabled ?

     In that case you should create Multipah Rule [by Interface]:
     Any → SMTP → Internet IPv4 → WAN1

    Uncheck "Skip rule on interface error" option (if you don't want do deliver mail through the dynamic IP interface in the case that static interface is down, e-mail will stay in the queue on UTM until the interface is up again)
Reply
  • 0
    I guess that you have Uplink Balancing enabled ?

     In that case you should create Multipah Rule [by Interface]:
     Any → SMTP → Internet IPv4 → WAN1

    Uncheck "Skip rule on interface error" option (if you don't want do deliver mail through the dynamic IP interface in the case that static interface is down, e-mail will stay in the queue on UTM until the interface is up again)
Children
No Data
Unfiltered HTML