Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 5 subscribers
  • Views 5850 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

No network leds on eth0/1/2 after UTM reinstall

MKR74

Hi,

I just reinstalled an UTM120 with UTM 9.5 (asg iso).

after successfull installation and reboot, the activity leds of eth0 (LAN) is only active for about 20 seconds (cable inserted) when booting and after that the LED does not show activity (also no LED blinking on the link led).

I only get an activity/link led, when I insert a network cable into eth3 (HA), but cannot connect to the webadmin.

 

What could be wrong?



This thread was automatically locked due to age.
Parents
  • 0

    Not sure what you mean by "asg iso" as you should use the ssi ISO.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0

    Not sure what you mean by "asg iso" as you should use the ssi ISO.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
Unfiltered HTML