UTM up2date from 9.413-4 to 9.500-9 boot issue. Non clustered, Single HD UTM, Non Raid

Hi, Varick, and welcome to the UTM Community!

What are the dozen lines before that?

Cheers - Bob

It says:

fsck from util-linux 2.19.1

fsck: fsck.ddf_raid_member: not found

fsck: Error 2 while execution fsck.ddf_raid_member for /dev/sda6

fsck failed. Mounting root device read-only

Mounting root /dev/disk/by-label/root

mount -o ro,data=ordered -t ddf_raid_member /dev/disk/by-label/root /{something i cant remember}

mount: unknown filesystem type 'ddf_raid_member'

could not mount root filesystem -- exiting to /bin/sh

This just happened to my Zotac Home install after updating.

Hi Guys,

same problem with our system, after updating from 9.4 to 9.5 UTM isn´t able to mount root filesystem.

Looks that the 9.5 have problems with older hardware

GoBlando said:

It says:

fsck from util-linux 2.19.1

fsck: fsck.ddf_raid_member: not found

fsck: Error 2 while execution fsck.ddf_raid_member for /dev/sda6

fsck failed. Mounting root device read-only

Mounting root /dev/disk/by-label/root

mount -o ro,data=ordered -t ddf_raid_member /dev/disk/by-label/root /{something i cant remember}

mount: unknown filesystem type 'ddf_raid_member'

could not mount root filesystem -- exiting to /bin/sh

This just happened to my Zotac Home install after updating.

 

So, I found the best thing to do with 9.5 was to use a fresh ISO and rebuild my config from scratch.  I had some really strange issues with the web proxy after I used the 9.5 iso and restored my 9.4 backup.

So I take it there is no solution other then Reinstall?

So I take it there is no solution other then Reinstall?