up2date from 9.413-4 to 9.500-9 release, the boot stops with this error
fsck.ddf_raid_member: not found
I am not configured for raid on this box. This is a single HD UTM. Any suggestions on this?
Hi, Varick, and welcome to the UTM Community!
What are the dozen lines before that?
Cheers - Bob
It says:
fsck from util-linux 2.19.1
fsck: fsck.ddf_raid_member: not found
fsck: Error 2 while execution fsck.ddf_raid_member for /dev/sda6
fsck failed. Mounting root device read-only
Mounting root /dev/disk/by-label/root
mount -o ro,data=ordered -t ddf_raid_member /dev/disk/by-label/root /{something i cant remember}
mount: unknown filesystem type 'ddf_raid_member'
could not mount root filesystem -- exiting to /bin/sh
This just happened to my Zotac Home install after updating.
Hi Guys,
same problem with our system, after updating from 9.4 to 9.5 UTM isn´t able to mount root filesystem.
Looks that the 9.5 have problems with older hardware
GoBlando said: It says: fsck from util-linux 2.19.1 fsck: fsck.ddf_raid_member: not found fsck: Error 2 while execution fsck.ddf_raid_member for /dev/sda6 fsck failed. Mounting root device read-only Mounting root /dev/disk/by-label/root mount -o ro,data=ordered -t ddf_raid_member /dev/disk/by-label/root /{something i cant remember} mount: unknown filesystem type 'ddf_raid_member' could not mount root filesystem -- exiting to /bin/sh This just happened to my Zotac Home install after updating.
So, I found the best thing to do with 9.5 was to use a fresh ISO and rebuild my config from scratch. I had some really strange issues with the web proxy after I used the 9.5 iso and restored my 9.4 backup.
So I take it there is no solution other then Reinstall?
