Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 6 subscribers
  • Views 5716 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

New build : which NICs ?

Alexandre Da Costa

Hi,

 

I'm planning a new build that will run UTM or XG. It will either use an i3-6100 or a G4560.

 

I've found some mainboards that have 2 Intel NICs, like Asrock H270M-ITX/ac. Onboard NICs are Intel I219-V/​Intel I211-V. Are they both HW NICs (not SW like realtek ones) ? And are they well supported by UTM/XG ?

 

Should I rather go with one of these mainboards or buy a dual Intel NICs pci-e card ?

 

Thanks !



This thread was automatically locked due to age.
Parents
  • 0

    i219v is not a supported nic. Very disappointing because there are alot of mitx mbs available using that nic.

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • 0

    i219v is not a supported nic. Very disappointing because there are alot of mitx mbs available using that nic.

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
Unfiltered HTML