Thread Info
  • State Verified Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 5 replies
  • Subscribers 9 subscribers
  • Views 13892 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM updated but previous version is still visible in available firmware to install

eclipse79

Hello,

I had 9.412-2 and 9.413-4 firmware versions ready for install. I "Updated to the latest version". The installation process was performed successfully. Now I see that 9.413-4 is the current firmware BUT 9.412-2 is ready to install (????)

Some screenshot here:

My first thought was that I had to manually force an up2date check, but it didn't solve the issue. Is it a known problem?

Thanks

eclipse79



This thread was automatically locked due to age.
Parents
  • 0

    Mmh, that should not be normal behavior. I updated an appliance today from 12 to 13 as well as 11 to 13 and both installations went fine.

    What kind/type of Appliance do you have, hardware (model?), software, virtual?

    Gruß / Regards,

    Kevin
    Sophos CE/CA (XG+UTM), Gold Partner

Reply
  • 0

    Mmh, that should not be normal behavior. I updated an appliance today from 12 to 13 as well as 11 to 13 and both installations went fine.

    What kind/type of Appliance do you have, hardware (model?), software, virtual?

    Gruß / Regards,

    Kevin
    Sophos CE/CA (XG+UTM), Gold Partner

Children
No Data
Unfiltered HTML