Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 6 subscribers
  • Views 4275 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Hardware specs from SG 105 Rev.1 und UTM ASG 110/120 Rev. 5 regarding RAM and HDD?

GerdMehsel

Hello,

can somebody tell me which mainboard/hardware the following devices have, or give me a hint where I can find this information

1) SG 105, rev.1

2) UTM ASG 110/120 Rev. 5

Since the devices are out of warranty I would like to increase RAM or replace the spinning HDD with a SSD.

Thank you,
Gerd



This thread was automatically locked due to age.
Parents
  • 0

    Hi Gerd,

    Just a "add-on" to Bob...

    Unless you install a software version instead of the hardware version, you won't be able to replace the disk either as it is Sophos prepped in some way.

    I recently cloned a UTM 120 SATA spinning drive to a SSD because of age ( happily forgotten that the box ran on hardware license ) and it simply refuses to start even on a block by block clone.

    I believe max mem is 2 GB.

     

    Cheers

Reply
  • 0

    Hi Gerd,

    Just a "add-on" to Bob...

    Unless you install a software version instead of the hardware version, you won't be able to replace the disk either as it is Sophos prepped in some way.

    I recently cloned a UTM 120 SATA spinning drive to a SSD because of age ( happily forgotten that the box ran on hardware license ) and it simply refuses to start even on a block by block clone.

    I believe max mem is 2 GB.

     

    Cheers

Children
No Data
Unfiltered HTML