Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 6 subscribers
  • Views 2086 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Evaluating UTM 9 - HA NOT working

Filipe Moreira

Hi!

 

I'm trying to evaluate Sophos UTM 9, in specific with a Active-Passive Scenario on 2 VMWare ESXi 6.5 Machines.

 

Whatever I do I get this on the slave logs:

"password authentication failed for user repmgr"

 

I already tried with automatic mode and with Active-Passive Mode.

 

I'm using a clean install (truth is I already installed it 2 or 3 times).

 

This is becoming so frustrating.

 

I already put vnics in promiscuous mode and all the other hints that I could found on these forums...



This thread was automatically locked due to age.
Parents
  • 0

    We are running a 2 VM instances of UTM 9.4x HA/HA Active/Passive on TWO ESXi 6.0 boxes (one HP one Dell)

     

    It works fine .. you DO need to get your LAN/WAN cabling sorted and clearly label EVERYTHING.

     

    Single biggest one .. get some BASIC SWitches so the VM machines have no DIRECT connection (except the HA LINK) thats a dedicated X over cable

     

    If still interested can detail our setup .. which works fine...

     

     

     

Reply
  • 0

    We are running a 2 VM instances of UTM 9.4x HA/HA Active/Passive on TWO ESXi 6.0 boxes (one HP one Dell)

     

    It works fine .. you DO need to get your LAN/WAN cabling sorted and clearly label EVERYTHING.

     

    Single biggest one .. get some BASIC SWitches so the VM machines have no DIRECT connection (except the HA LINK) thats a dedicated X over cable

     

    If still interested can detail our setup .. which works fine...

     

     

     

Children
No Data
Unfiltered HTML