This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos UTM 9 Home edition - Windows Server 2012 R2, Hyper V

Hi,

I am running Sophos UTM 9 Home edition on Lenovo T410 (CPU i7 with 4 cores, 2GB RAM) running Windows Server 2012 R2 - Hyper V. ISP is UPC with connectivity of 200Mb/20Mb.

Now if I use the UTM then the connectivity drops to like 60Mb/10Mb even with turned off IPS, Advanced Threat Protection, Web filtering and DOS/FLOOD. I wonder if there is any bad configuration on my side or if I simply cannot get it working with better bandwidth no matter what. Maybe the Hyper V bottlenecks it? I actually have dedicated 2 CPUs and all 2GB of RAM to the Hyper V and still it does run around 75% of usage pretty much all the time. Do you think that upgrading RAM could increase the throughput ?

Thank you

Kind Regards,

Filip

This thread was automatically locked due to age.

Parents

Bohdan.S over 7 years ago

What is the CPU and RAM usage of the VM?

What network cards are you using?

See: https://community.sophos.com/kb/en-us/119230

And: https://www.sophos.com/en-us/medialibrary/PDFs/documentation/utm9408_manual_eng.pdf?la=en

But you do meet the 'minimum' requirements.

If you can spare the resources, try Doubling CPU and RAM, then remove extra resources after testing.

Regards,
Bohdan
Cancel
Vote Up 0 Vote Down

Cancel
rfcat_vk over 7 years ago in reply to Bohdan.S

Hi folks,

there are a number of threads about minimum specifications and 2gb of ram with what you have enabled will not be enough, you will need at least 4gb for the UTM and 2gb for the server preferably more eg 3gb.

I have to assume you are running a USB ethernet device, check that it is a USB3 and connected to a USB3 port.

XG115W - v20.0.2 MR-2 - Home

XG on VM 8 - v21 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

rfcat_vk over 7 years ago in reply to Bohdan.S

Hi folks,

there are a number of threads about minimum specifications and 2gb of ram with what you have enabled will not be enough, you will need at least 4gb for the UTM and 2gb for the server preferably more eg 3gb.

I have to assume you are running a USB ethernet device, check that it is a USB3 and connected to a USB3 port.

XG115W - v20.0.2 MR-2 - Home

XG on VM 8 - v21 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel

Children

Filip Stedry over 7 years ago in reply to rfcat_vk

Hi chaps,

thank you for troubleshooting. I actually did not realise that my lenovo does not support USB3 and so the ethernet adapter is USB2 therefore the problems with download. SOLVED

Now my question would be if there is any HW appliance that would work for me with home edition?

Filip
Cancel
Vote Up 0 Vote Down

Cancel
rfcat_vk over 7 years ago in reply to Filip Stedry

I have just finished moving my UTM from a vm to physical server based on a asus P10s-i using a e3-1225v5 with 8gb of ram. Comes with 2 onboard intel nics.

Currently using about 30w. I have used other mbs but you can check the unofficial hardware thread in this forum for cheaper options.

XG115W - v20.0.2 MR-2 - Home

XG on VM 8 - v21 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel