Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 5 subscribers
  • Views 6435 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

After Update to 9.408-4 interface is missing

Rene Keller

hi @all,

after updating my Sophos UTM virtual appliance to the latest version one of my NICs is missing. There we're no changes on the vm settings, but after rebootinng the vm, the interface eth4 is missing, in the hardware overview I can see the interfaces eth0 - eth3 and eth5 - eth6. Also since the update I'm not allowed to ping any system in another private network (Routing from eth1 to eth2).

 

Does anyone know what happened and how to fix this? I've tried removing the problematic NIC, but without success.



This thread was automatically locked due to age.
Parents
  • 0

    Hi, Rene, and welcome to the UTM Community!

    Before you load a new ISO into a new VM, try two things:

    1. Restore from the backup made just prior to applying the Up2Dare.
    2. Reboot the UTM.

    Any luck with wither of those?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    Hi Bob,

    thank you for your reply.

     

    Due to fixing the /etc/udev/rules.d/70-persistent-net.rules I didn't tried your solution.

Reply Children
No Data
Unfiltered HTML