Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 4 replies
  • Subscribers 6 subscribers
  • Views 5104 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Hardware for Sophos UTM home

mind j

Good day,

I am looking to purchase a machine so I can host sophos on it. (i dont have spare computers at home).

I was looking at this: http://www.ncix.com/detail/gigabyte-brix-barebone-gb-bsi5hal-6200-core-d1-135173.htm (Missing ram and SSD)

Is it too much? Should I go with some lower specs?


There are max 10 device connected to a time capsule (wifi) but only 2 of them are always online. All the other devices and on and off.

Thanks for all the tips!



This thread was automatically locked due to age.
Parents
  • 0

    I would replace an existing machine that is a little older with a new one and then use the older one for the UTM (and possibly add a NIC or two to it).  A fast pentium G or i3 would be plenty for the UTM.  However, one of the big concerns would be what your internet connection speed is.  Fast speeds, more CPU (especially if you are going to use the IDS/IPS functionality).  You really want a couple of NICs rather than the 1 the Brix provides.  You CAN use just one, but far better to separate the zones physically, IMHO.

Reply
  • 0

    I would replace an existing machine that is a little older with a new one and then use the older one for the UTM (and possibly add a NIC or two to it).  A fast pentium G or i3 would be plenty for the UTM.  However, one of the big concerns would be what your internet connection speed is.  Fast speeds, more CPU (especially if you are going to use the IDS/IPS functionality).  You really want a couple of NICs rather than the 1 the Brix provides.  You CAN use just one, but far better to separate the zones physically, IMHO.

Children
Unfiltered HTML