Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 6 replies
  • Answers 1 answer
  • Subscribers 6 subscribers
  • Views 13470 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

50% CPU Utilization, 32-bit Install?

busthead

Hello, My CPU is almost always running at around 50+%. kswapd0 appears to be the culprit. That caused me to take a closer look at the RAM display on my Dashboard: 56% of 3.6 GB used. Experience tells me that 3.6 GB sounds like a 32-bit system with 4 GB or RAM. So back to the command line I go:

Hillary:/home/login # uname -a
Linux Hillary 3.12.48-0.218133626.g829be90.rb1-smp64 #1 SMP Thu Jan 14 11:38:22 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

x86_64 is 64-bit right??

Hillary:/home/login # file /sbin/init
/sbin/init: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV)...

So is this a 32-bit install or a 64-bit install?

Astaro v9.356-3 running as a XenServer guest with two vCPUs: 1 socket with 2 cores per socket



This thread was automatically locked due to age.
Parents
  • 0

    Hi,

    Like for the name of UTM (y)

    UTM has a 64 bit kernel. Execute, uname -m

    x86_64 = 64 bit kernel

    i686 = 32 bit kernel

    Generally, 64 bit system will utilize approximately 4 GB of RAM hence 56% CPU is a actually normal at your end.

    Thanks

    Sachin Gurung
    Team Lead | Sophos Technical Support
    Knowledge Base  |  @SophosSupport  |  Video tutorials
    Remember to like a post.  If a post (on a question thread) solves your question use the 'This helped me' link.

  • 0 in reply to sachingurung

    Thank you. I verified that my kernel is 64 bits. Does it follow then that if I increase the system memory that the CPU utilization will decrease?

     I should mention that the kswapd0 process appears to be consuming most of the CPU's cycles and there are extended periods of time, up to 9.5 hours, where the CPU averages around 3% - which is my goal.

    Here's a screen grab of processes sorted by SWAP:

    Am I reading this correctly that the postgress process has 7GB of memory swapped to the hard disk? If so, is this normal and expected?

  • 0 in reply to busthead

    Hi, 

    Yes, system memory must be increased. Reduce the retention period configured in the report settings, this can help the memory issue with postgres. 

    Thanks

    Sachin Gurung
    Team Lead | Sophos Technical Support
    Knowledge Base  |  @SophosSupport  |  Video tutorials
    Remember to like a post.  If a post (on a question thread) solves your question use the 'This helped me' link.

Reply Children
Unfiltered HTML