Thread Info
  • State Verified Answer
  • +2 person also asked this people also asked this
  • Locked Locked
  • Replies 7 replies
  • Answers 1 answer
  • Subscribers 6 subscribers
  • Views 10537 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Reimaging Sophos SG115 rev.2 problems

DByteUser

I have a sophos sg115 rev.2 with Basic guard subscription. I tried to reimage my sophos sg115 with an Image from Sophos Donwload Source https://www.sophos.com/de-de/support/utm-downloads.aspx.

First i downloaded UTM v9 Hardware Appliance 9.406-3.1 ISO and burnded it do disc. When I tried to install from USB-DVD-Drive the message "No appliance Hardware has been detected." appears. Then the Installation stops. I checked the Installation log and there is the following line: "ASG autodetect sg115:r1 (matches 8/9) failed".

For me it seems like the installer doesn`t know ssg115 rev2?!

After that i tried with UTM v9 Hardware Appliance 9.217-3.1 ISO. Same Message but i was able to install the System anyway. After reboot i connected to webadmin and tried to Import my license (subscription Basic guard for sg115) and get error "Cannot use SG115 license on ASG software device"

Can anybody help me, please?



This thread was automatically locked due to age.
Parents
  • 0

    Hi,

    How about downloading the firmware from ftp.astaro.com/.../  and later migrating the firmware.

    Thanks

    Sachin Gurung
    Team Lead | Sophos Technical Support
    Knowledge Base  |  @SophosSupport  |  Video tutorials
    Remember to like a post.  If a post (on a question thread) solves your question use the 'This helped me' link.

  • 0 in reply to sachingurung

    Hi sachingurung,  

    when i go to ftp.astaro.com, and select UTM and Hardware Appliance  there is a README-File which Points me to  https://www.sophos.com/de-de/support/utm-downloads.aspx....

    Where exactly can I find the firmware?

  • 0 in reply to DByteUser

    Try the up2date folder,  ftp.astaro.com/UTM/v9/up2date/ 

    Sachin Gurung
    Team Lead | Sophos Technical Support
    Knowledge Base  |  @SophosSupport  |  Video tutorials
    Remember to like a post.  If a post (on a question thread) solves your question use the 'This helped me' link.

  • 0 in reply to sachingurung

    Hi Sachin Gurung,

    thanks for your reply.

    I have reimaged the sg115 again and have installed the packages from up2date (i hope i have understood your answer :-) ) but i'm still not able to install my license. After that i looked into the installer-log (saved to usb during reimaging before).

    In the log-file are some DMI-Errors during hw-check.

    "trying to read data from DMI

    can't get dmi data

    error in dmi_data"

    and later...

    [netcard]   _Count -> 4                                                                      [1] 

    [cpu]         Cache   -> 512kb                                                             [1]

    [cpu]         _Count -> 2                                                                      [1]

    [cpu]         Vendor -> GenuineIntel                                                    [1]

    [cpu]          Model -> Intel (R) Atom (TM) CPU E3827 @ 1,74GHz   [1]

    [disk]         Model -> TS64GSSD370                                                 [1]

    [dmi_sys]  Version -> 115r2                                                              [0]

    and later ...

    "ASG autodetect SG115:r1 (matches: 8/9) failed"

    It seems like UTM installer is not able to detect the appliance because DMI is not working correct. Is it possible, that version-information from bios are erased because of

    utm was powered of an battery is not working correct? I always lost date/time when sg is plugged off.  

  • +1 in reply to DByteUser

    Hi,

    I am not sure if that can occur due to a power off. I think you need to get this reported to the customer service team who looks after licensing. May be they know if there is a problem in SG Rev2 appliances. Please contact customercare@sophos.com .

    Thanks

    Sachin Gurung
    Team Lead | Sophos Technical Support
    Knowledge Base  |  @SophosSupport  |  Video tutorials
    Remember to like a post.  If a post (on a question thread) solves your question use the 'This helped me' link.

Reply
  • +1 in reply to DByteUser

    Hi,

    I am not sure if that can occur due to a power off. I think you need to get this reported to the customer service team who looks after licensing. May be they know if there is a problem in SG Rev2 appliances. Please contact customercare@sophos.com .

    Thanks

    Sachin Gurung
    Team Lead | Sophos Technical Support
    Knowledge Base  |  @SophosSupport  |  Video tutorials
    Remember to like a post.  If a post (on a question thread) solves your question use the 'This helped me' link.

Children
Unfiltered HTML