Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 8 replies
  • Answers 1 answer
  • Subscribers 6 subscribers
  • Views 9818 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

web admin will not come up

johnhaken

I have a dell optiplex 7010 with the following hardware

Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz
8 gig ddr 3 ram
Intel® PRO/1000 PT Dual Port Server Adapter
230 gig hard drive

I cannot bring up the web admin page on the pc I have tried on the physical computer as well as trying on a different desktop with vmware.. I go the the https://192.168.2.100:4444 and it does not connect. I have tried it in vmware workstation 12 and I get the same problem. I have selected 2 cpu cores, 8 gigs memory, store in single file, 120 gb virtual disk, and 2 network adapters ( i have tried NAT and Bridged , tried vmnet 0 and 8. ). I Do not know what to try next. any suggestions?



This thread was automatically locked due to age.
Parents
  • 0

    Which ISO are you installing?  Have you checked the md5sum?  In VMware, did you use VMXNET3 adapters?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    I am using 9.4 . I made sure to download the software and not the hardware version.  I have a Intel Pro /1000 PT Dual Port Server Adapter. I works great in windows 7 and 10.  I have Set up the Dell hardware I am using for Sophos UTM 9 with a 60 gig SSD. I went through the install and made sure I configured the time, country, and state as well as took note of the Ethernet adapters. They were listed as:

    ETH0 Intel Ethernet Controller

    ETH1 Intel Pro/1000 PT Dual Port Server Adapter

    ETH2 Intel Pro/1000 PT Dual Port Server Adapter

    I chose the ETH1 for Webadmin And the Ip was left at the default (192.168.2.100.). I removed the cd, and rebooted. I left the Ethernet connection for my Internet Unconnected to the Dell with Sophos UTM 9.4. I connected a cable to the Dell and tried to connect using 192.168.2.100:4444 and https://192.168.2.100:4444. It brought up a timeout error in firefox.( I am using version 47. I also tried In Internet Explorer and Chrome- connection errors too. I tried all 3 ports on the dell with several computers and I was not able to bring up the WebAdmin Portal. The computers I tried were windows 7 Pro, Window 7 home premium, and Windows 10 Pro. I have DSL Connection for Internet, 20 Meg down 2 meg up. The Interface to my Modem/router is 192.168.0.1. I tried to change the settings in the control panel on the connections to bypass proxy( I do not have a proxy running) and to bypass internal network. I also tried to set the network adapters to a static IP (192.168.2.2, subnet 255.255.255.0).I also tried it left to connect automatically(DHCP). I figured the DHCP would not work because it was not setup yet. I am unable to connect with a static Ip, DHCP, or changed settings in the internet connection options in the control panel. Any suggestions?

Reply
  • 0 in reply to BAlfson

    I am using 9.4 . I made sure to download the software and not the hardware version.  I have a Intel Pro /1000 PT Dual Port Server Adapter. I works great in windows 7 and 10.  I have Set up the Dell hardware I am using for Sophos UTM 9 with a 60 gig SSD. I went through the install and made sure I configured the time, country, and state as well as took note of the Ethernet adapters. They were listed as:

    ETH0 Intel Ethernet Controller

    ETH1 Intel Pro/1000 PT Dual Port Server Adapter

    ETH2 Intel Pro/1000 PT Dual Port Server Adapter

    I chose the ETH1 for Webadmin And the Ip was left at the default (192.168.2.100.). I removed the cd, and rebooted. I left the Ethernet connection for my Internet Unconnected to the Dell with Sophos UTM 9.4. I connected a cable to the Dell and tried to connect using 192.168.2.100:4444 and https://192.168.2.100:4444. It brought up a timeout error in firefox.( I am using version 47. I also tried In Internet Explorer and Chrome- connection errors too. I tried all 3 ports on the dell with several computers and I was not able to bring up the WebAdmin Portal. The computers I tried were windows 7 Pro, Window 7 home premium, and Windows 10 Pro. I have DSL Connection for Internet, 20 Meg down 2 meg up. The Interface to my Modem/router is 192.168.0.1. I tried to change the settings in the control panel on the connections to bypass proxy( I do not have a proxy running) and to bypass internal network. I also tried to set the network adapters to a static IP (192.168.2.2, subnet 255.255.255.0).I also tried it left to connect automatically(DHCP). I figured the DHCP would not work because it was not setup yet. I am unable to connect with a static Ip, DHCP, or changed settings in the internet connection options in the control panel. Any suggestions?

Children
Unfiltered HTML