Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 6 subscribers
  • Views 13381 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Wireless Bridge to AP LAN Setup Sophos UTM SG 105W

TeoCorona

I have been trying to associate my wireless SSID (Bridged to AP LAN) to the local access point. When I select and apply this network, I get the following error message: "The access point "LocalWifi0" can't use the client traffic option :Bridge to AP LAN" which is used by the SSID "xxxx".

Under the interface section: I have a bridge created with the Wifi network and the my LAN port (eth0)

Firewall rule was created to accept communication and also a DHCP server is listed to supply IPs. A masquerade was also set from the Bridge LAN to the wireless.

If someone can help it would be helpful

Thanks



This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to BAlfson

    I was told that there was a bug on 9.3 and need it to upgrade my firmware.  Don't drive yourself crazy, you are probably doing it right.

    I'm in the process of doing the firmware update ( not very user friendly), after is done I will update here the results.

Unfiltered HTML