Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 16 replies
  • Subscribers 5 subscribers
  • Views 45957 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Home Use License on UTM appliance?

tms5d
This might be a stupid question, but I have to ask anyway [:)]

Is it technically possible to use my ASG Home Use License on a Sophos SG125(w) aplliance? Please note, that I do not own a company (in which case I would not be not allowed to use a home use license). 

Kind regards


This thread was automatically locked due to age.
Parents
  • 0
    Found out so far that the LCD display has a view, where is says:

    All in 213kbit/s
        out 21kbit/s

    This view is frozen after above setting, but anything else works

    -----

    Best regards
    Martin

    Sophos XGS 2100 @ Home | Sophos v20 Technician

  • 0 in reply to twister5800
    Found out so far that the LCD display has a view, where is says:

    All in 213kbit/s
        out 21kbit/s

    This view is frozen after above setting, but anything else works


    I have the same problem with an ASG 320 rev 4.  I can cycle through the Uptime/CPU/RAM/Bytes, but on the Uptime is updating the rest are static.  Has anyone solved this issue?
Reply
  • 0 in reply to twister5800
    Found out so far that the LCD display has a view, where is says:

    All in 213kbit/s
        out 21kbit/s

    This view is frozen after above setting, but anything else works


    I have the same problem with an ASG 320 rev 4.  I can cycle through the Uptime/CPU/RAM/Bytes, but on the Uptime is updating the rest are static.  Has anyone solved this issue?
Children
No Data
Unfiltered HTML