This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Home Use License on UTM appliance?

This might be a stupid question, but I have to ask anyway [:)]

Is it technically possible to use my ASG Home Use License on a Sophos SG125(w) aplliance? Please note, that I do not own a company (in which case I would not be not allowed to use a home use license).

Kind regards

This thread was automatically locked due to age.

Parents

0 BAlfson over 9 years ago

I don't know, Barry. I had just found out that "cc get_objects_filtered" no longer works in 9.3, so I wanted to be careful.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 BAlfson over 9 years ago

I don't know, Barry. I had just found out that "cc get_objects_filtered" no longer works in 9.3, so I wanted to be careful.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 twister5800 over 9 years ago in reply to BAlfson
Hi Guys,

I don't know, Barry. I had just found out that "cc get_objects_filtered" no longer works in 9.3, so I wanted to be careful.

Cheers - Bob

Have just tried this from Sievers:
https://www.astaro.org/gateway-products/hardware-installation-up2date-licensing/25840-non-asg-install-asg-hardware-4.html

in /etc/init.d/utm-lcd
change line 1
ASG_FILE="/etc/asg"
to
ASG_FILE="/etc/asx"

then rename /etc/asg to /etc/asx

mv /etc/asg /etc/asx

With a SG 210 rev.1 and UTM 9.306-6

And everything works with hw iso, and LCD and home license :-)
-----

Best regards
Martin

Sophos XGS 2100 @ Home | Sophos v20 Architect
Cancel
Vote Up 0 Vote Down

Cancel