Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 7 replies
  • Answers 1 answer
  • Subscribers 5 subscribers
  • Views 1119 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Complete new Hardware, will Backup work ?

WolfgangS

Got complete new Hardware for the UTM 9

Intel Board, Core i3 , till now 2 Intel Ct Gigabit desktop adapter 3 is on the way.

The question is: what happens, if i make a fresh install and then import a backup ?

What happens to the interfaces ?

Will an Intel NIC  Intel I350-T2 I350AM2 Chip, Dual RJ45 Port

work with the utm 9 ?



This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to BAlfson

    Hi Bob,

    Thanks for ur answer.

    well that did not work.

    I got  a new motherboard, new CPU , new RAM and new NIC's .

    After i installed the UTM from iso 7.503 and updated to the latest 7.609, the nics are fine.

    after i import my backup from the old (hardware i use) UTM 9 and reboot, the nics are dead.  no interface is coming up, no link, no nothing.

    regadless what new nic i try.

    after the backup i checked the modules and the modules of the nics are loaded ( all intel) , i have no idea why the nic's won't come up.

  • 0 in reply to WolfgangS

    I see that my link to the Sophos HCL doesn't work anymore, Wolfgang.

    How about a picture from the 'Hardware' tab in 'Interfaces'?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    Hi Bob,

     the old hardware:

    new hardware:

  • 0 in reply to WolfgangS

    Danke, Wolfgang.  I deleted the external links in your post and replaced them with the actual images. I opened the links in a sandbox (free from Sophos) and copied the images.  We can't know if that external site is properly protected. The only malware I've gotten in over 10+ years was from an external link to a picture in this forum over 5 years ago.  Thanks in advance for not posting external links here.

    How about pictures of the old and new 'Interfaces' tab?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to WolfgangS

    i finaly found the error !

    i had a broken (!) test hub .. geez. connected a new small cisco 8 port switch and it worked.

    can't belive it !

    all that work and testing because of a broken device !

    and thanks for ur time Bob

Unfiltered HTML