Hardware, Installation, Up2Date, Licensing Update not working

UTM Firewall requires membership for participation - click to join

Thread Info

State Verified Answer
Locked Locked
Replies 3 replies
Subscribers 7 subscribers
Views 1495 views
Users 0 members are here

Options

Suggested

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Update not working

Remuflon over 3 years ago

I tried (twice) to update UTM 9.705-3 to 9.706-9.

I uploaded the file to UTM.

It shows that it is ready to apply the correct version. I ran the update and rebooted.

UTM is back to 9.705-3. Nothing changed. I tried the whole process twice.

This thread was automatically locked due to age.

Top Replies

Albeck over 3 years ago +1 verified

There is no update package from 9.705-3 to 9.706-9. There are only updates from 9.705-3 to 9.705-7 or 9.706-8. After that you can go to 9.706-9.

Parents

0 Remuflon over 3 years ago

Notice the runtime was 1 second? It did the first step then rebooted.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Remuflon over 3 years ago

Notice the runtime was 1 second? It did the first step then rebooted.
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 Amodin over 3 years ago in reply to Remuflon

I would try the 9.705-3 to 9.705-7 and see what it does (https://download.astaro.com/UTM/v9/up2date/u2d-sys-9.705003-705007.tgz.gpg). I would also check your log file for Up2Date and see if you have any errors with this attempt.

You might have an issue with some kind of interruption on the UTM. I have sometimes had to reboot my UTM, unplug external NIC, upload my file and then update.

download.astaro.com/.../u2d-sys-9.705003-706008.tgz.gpg

OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
(Former Sophos UTM Veteran, Former XG Rookie)
Cancel
Vote Up 0 Vote Down

Cancel