This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

New Bios for SG125 Rev. 1

Hi,

i just ordered a dead SG125 with C2000 Bug and fixed the LPC_CLKOUT0 with 180 Ohms.
There is still a UTM 9.7 installed and i might reinstall the hardware image ...

I wonder if there is any new BIOS for this devices?

Current BIOS is 2.16.1242 09/04/2014


Will a trial installation of the UTM Appliance update the BIOS?

Has anyone some information about this?

Thanks

Jürgen



This thread was automatically locked due to age.
Parents Reply Children
  • Hi,

    i used an 0603 180 Ohms Resistor. I soldered it vertical.
    I think with a 0402 you could solder it between R852 and the right Resistor of R852.
    Hardware Information (Voltages, Fan Speed, etc.) in Bios looks fine to me.

    I got this SG 125 r1 for 46€ at ebay :-)

    I will install XG 18 Home Edition and AP15 ...