This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

New Bios for SG125 Rev. 1

Hi,

i just ordered a dead SG125 with C2000 Bug and fixed the LPC_CLKOUT0 with 180 Ohms.
There is still a UTM 9.7 installed and i might reinstall the hardware image ...

I wonder if there is any new BIOS for this devices?

Current BIOS is 2.16.1242 09/04/2014

Will a trial installation of the UTM Appliance update the BIOS?

Has anyone some information about this?

Thanks

Jürgen

This thread was automatically locked due to age.

Top Replies

juergenb52 over 3 years ago in reply to twister5800 +1

Hi, i used an 0603 180 Ohms Resistor. I soldered it vertical. I think with a 0402 you could solder it between R852 and the right Resistor of R852. Hardware Information (Voltages, Fan Speed, etc.) in…

Parents

0 twister5800 over 3 years ago

UPDATE: Found it :-)community.sophos.com/.../sg135-c2000-bug

No it will not :-(

Can you link to the resister-fix?

i have 3 laying around :-)

-----

Best regards
Martin

Sophos XGS 2100 @ Home | Sophos v20 Architect
Cancel
Vote Up 0 Vote Down

Cancel
0 juergenb52 over 3 years ago in reply to twister5800

Hi,

i used an 0603 180 Ohms Resistor. I soldered it vertical.
I think with a 0402 you could solder it between R852 and the right Resistor of R852.
Hardware Information (Voltages, Fan Speed, etc.) in Bios looks fine to me.

I got this SG 125 r1 for 46€ at ebay :-)

I will install XG 18 Home Edition and AP15 ...
Cancel
Vote Up +1 Vote Down

Cancel

Reply

0 juergenb52 over 3 years ago in reply to twister5800

Hi,

i used an 0603 180 Ohms Resistor. I soldered it vertical.
I think with a 0402 you could solder it between R852 and the right Resistor of R852.
Hardware Information (Voltages, Fan Speed, etc.) in Bios looks fine to me.

I got this SG 125 r1 for 46€ at ebay :-)

I will install XG 18 Home Edition and AP15 ...
Cancel
Vote Up +1 Vote Down

Cancel

Children

No Data