Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 7 subscribers
  • Views 2749 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Emergency repair SG210 Rev 2 - dead SSD replacement

Adrien Belcourt1

Hi Community,

I need to replace a dead SSD in an SG210 Rev 2 box.  Has anyone any experience in doing this?  

It looks like it should be straight forward with re-imaging the box after replacing the SSD with a similar spec one.  

Any thoughts?  

[Hold your RMA thought.... see following for why emergency measures are needed:  
https://community.sophos.com/products/unified-threat-management/f/hardware-installation-up2date-licensing/122615/extreme-problems-with-raising-an-rma-for-next-business-day-replacement ]

Thanks in advance,

Adrien. 



This thread was automatically locked due to age.
Parents
  • 0

    With completely empty SSD, possible the installer don#t recognize the "hardware Appliance".

    With RMA HDD this should not be a problem.

     


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Reply
  • 0

    With completely empty SSD, possible the installer don#t recognize the "hardware Appliance".

    With RMA HDD this should not be a problem.

     


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Children
Unfiltered HTML