I've set up about 10 of these before and never had this issue. I plug my ethernet cable into the eth0 port from my laptop. boot sg115 my laptop shows ethernet connection until the firewall is fully booted then says not connected. cannot ping device at any point during boot process. I can log into the cmd line by attaching a monitor and keyboard. but that is the limit of my access. At first i thought it was because i forgot to change my ip address to the correct subnet (the others i set up were 192.168.1 or 192.168.0) but im at 192.168.2.88 on my laptop and i still get nothing. very lost right now any suggestions would be great.
This thread was automatically locked due to age.