Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 18 replies
  • Answers 1 answer
  • Subscribers 6 subscribers
  • Views 76268 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Home License on SG115

BlueRue

So I bought a SG115 appliance only and I am trying to load my home license onto it and it is telling me I cannot load an ASG license on the appliance. I deleted my old license and recreated a new one with the same results.

Anyone offer any help on this?



This thread was automatically locked due to age.
Parents
  • 0

    You don't need a special adapter.
    In WebAdmin, go to Management > System Settings > Shell Access. Enable, set the allowed Networks, and set passwords for both Loginuser and Root separately.

    Use Putty (or similar SSH client) to access shell.

    Login as Loginuser

    Type "su -" without quotes and hit enter to elevate to root, enter your root password.

    To delete file: "rm /etc/ASG" without quotes and hit enter. Alternately, you can use the mv command to rename the file instead.

    Reboot the UTM. Now it should allow you to apply the home license.

    "or the search on the new forum is not that great"  The content here is extremely limited currently, so there isn't any information on this process here yet.

    __________________
    ACE v8/SCA v9.3

    ...still have a v5 install disk in a box somewhere.

    http://xkcd.com
    http://www.tedgoff.com/mb
    http://www.projectcartoon.com/cartoon/1
Reply
  • 0

    You don't need a special adapter.
    In WebAdmin, go to Management > System Settings > Shell Access. Enable, set the allowed Networks, and set passwords for both Loginuser and Root separately.

    Use Putty (or similar SSH client) to access shell.

    Login as Loginuser

    Type "su -" without quotes and hit enter to elevate to root, enter your root password.

    To delete file: "rm /etc/ASG" without quotes and hit enter. Alternately, you can use the mv command to rename the file instead.

    Reboot the UTM. Now it should allow you to apply the home license.

    "or the search on the new forum is not that great"  The content here is extremely limited currently, so there isn't any information on this process here yet.

    __________________
    ACE v8/SCA v9.3

    ...still have a v5 install disk in a box somewhere.

    http://xkcd.com
    http://www.tedgoff.com/mb
    http://www.projectcartoon.com/cartoon/1
Children
Unfiltered HTML