This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Port erweitertung / SFP Module für HA

Hallo zusammen,

ich habe aktuell 2 SG230 als HA eingerichtet.

Nun möchte ich eine Sophos in ein anderes Teil unseres RZ stellen  (ca. 300) Meter weiter weg. Zusätzlich möchte ich die Sophos mit 8 port GbE SFP FleXi Port module und Sophos 1000Base-SX Fiber Transceiver erweitern. Die Idee ist nun folgende und zwar ich möchte die HA über die SFP Module laufen und meine Frage ist, ob es überhaupt möglich ist, es über SFP laufen zu lassen?



This thread was automatically locked due to age.
  • Hello there,

    Thanks for reaching out to Sophos Community

    Yes this is possible, for recommended approach, schedule a downtime for this activity then install individual SFP modules while the unit/s are turned off. 

    You would start to shutdown the slave first then Install the module but do not turn it on just yet > Then afterwards shutdown the master - this is where downtime starts. > Install the module and power on the master > Wait until all services are up and running > Check the module in Webadmin - Hardware should be up and running > You can power on the slave with the module and check the HAsync

    I would also recommend you to get in touch with your local Sophos Partner/SE or if you would opt for a Professional Services for this activity and have this planned accordingly. 

    Hope this helps. Have a nice day and thank you for choosing Sophos.

    cheers,

    Raphael Alganes
    Community Support Engineer | Sophos Technical Support
    Sophos Support Videos Product Documentation  |  @SophosSupport  | Sign up for SMS Alerts
    If a post solves your question use the 'Verify Answer' link.