I can't Access Web Admin via WAN

Hello Patrick ,

Thank you for reaching out to the community, please refer the following steps:

To change the password for admin run 

cc passwd mynewpassword

To change the WebAdmin port to 4444, run

cc set webadmin port 4444

To confirm that "Internal (Network)" is in 'Allowed Networks' for WebAdmin:

cc get webadmin allowed_networks

That will give you one or more REF_ objects.  One of mine is REF_nuSwABYbAt

cc get_object REF_nuSwABYbAt |grep \'name

and that tells me: 'name' => 'Internal (Network)',

If 'Allowed networks' is empty, we need the REF_ for "Internal (Network)"

cc get_object_by_name 'network' 'interface_network' 'Internal (Network)'

Once you have the REF_, you can add it.  Using mine as an example (note the extra @ and + symbols - copy, paste and enter each line seprately!):

cc
webadmin
allowed_networks@
+REF_nuSwABYbAt
exit

Now, you should be able to login to web-admin as admin from the LAN.

Hello Patrick ,

Thank you for reaching out to the community, please refer the following steps:

To change the password for admin run 

cc passwd mynewpassword

To change the WebAdmin port to 4444, run

cc set webadmin port 4444

To confirm that "Internal (Network)" is in 'Allowed Networks' for WebAdmin:

cc get webadmin allowed_networks

That will give you one or more REF_ objects.  One of mine is REF_nuSwABYbAt

cc get_object REF_nuSwABYbAt |grep \'name

and that tells me: 'name' => 'Internal (Network)',

If 'Allowed networks' is empty, we need the REF_ for "Internal (Network)"

cc get_object_by_name 'network' 'interface_network' 'Internal (Network)'

Once you have the REF_, you can add it.  Using mine as an example (note the extra @ and + symbols - copy, paste and enter each line seprately!):

cc
webadmin
allowed_networks@
+REF_nuSwABYbAt
exit

Now, you should be able to login to web-admin as admin from the LAN.

Thank you for reply. Thank you Vivek but I am able to connect via lan. I cannot connect via wan like https://hostname.ddns.me:4444

Thank you

Thank you for replying Vivek. I am able to access via lan. As I said I cannot access via hostname like example hostname..ddns.me:4444

Hey Patrick , Add a DNS Static host entry and then check:

I cannot put host because It wants ipv4 address. I put inside Network Definition  type DNS host then I put the hostname that I have inside Dyndns.

I cannot access again.

Should I to put hostname  somewhere in Sophos UTM?

Try adding a hostname under the network definition 

I have already got it. I created  inside Network Definitions type DNS host then I put my hostame the same in Dyndns but nothing...

Upon performing the nslookup from the advance shell or Under the support > Tools > DNS Lookup > does it the Hostname/IP resolve ?

Yes! It show my real public IP

And when you ping the hostname does it resolve the IP ?

Yes It does! It show ping and traceroute.