Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 10 replies
  • Subscribers 10 subscribers
  • Views 2257 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Printer

zeus1976

Hello together,

I come to you because I have a funny situation.

Setup:
Network A: 192.168.2.0/24 (clients)
Network B: 192.168.3.0/24 (printer)

The printer is in network B - but the clients are in network A.

Problem:
- If I print via network A to Network B, it does not work.
- When I print over network B, it works fine

Setting:
- I made a firewall rule that the clients in network A can access the printer network B (Source: Network Subnet / Port: Any / Destination: Printer)
- The printer assignment is done via IP address

Remark:
- Both on mobile and Windows 10 I have the problem.
- Firewall Sophos UTM - newest version


Why does it not work? Is there anything I can adjust on the firewall?

Best regards



This thread was automatically locked due to age.
Parents
  • 0

      no, the firewall logs show that it is not blocked. I tried it with a return firewall rule, but the problem still persists.

      Here you have the logs - i have tried over the mobil (Port 161) or over the laptop (port 80). but is still not printed


    What can I do to solve the problem?

    Best regards

  • 0 in reply to zeus1976

    Salut,

    Philipp and Dirk haven't found an answer for you because there's no real information about your problem.  We need to see lines where traffic to the printer is blocked - check #1 in Rulz.  If there are no blocks in the UTM logs, one has to suspect a printer setting.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0 in reply to zeus1976

    Salut,

    Philipp and Dirk haven't found an answer for you because there's no real information about your problem.  We need to see lines where traffic to the printer is blocked - check #1 in Rulz.  If there are no blocks in the UTM logs, one has to suspect a printer setting.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML