I have Sophos UTM with an Internet Speed of 200mbps bridged mode by ISP.
But my wireless AP15 doesn't have the same speed. I only get 10mbps max.
Did you verify that the link and wire you are using to the AP isnt broken?
See if you attach a client to that wire the autoneg gives you 100M or 1G?
Not sure if AP15 can provide more speed though, what do the specs say?
I have several AP100 connected to my UTM, they seem to max out at around 250mbps. I have a 10G uplink to my ISP and Gigabit to the APs.
Are you testing with a wireless network that's "Bridge to AP LAN"? "Separate Zone" networks can have MTU mismatches that slow things down.
Cheers - Bob
It's not broken or something. I have another router and it gives the same speed as my AP15.
Wireless Network Bridge to AP Lan. I also tried 1450 MTU and 1280 MTU.
There's a slight difference in speed but still not parallel with my 200mbps bandwidth.
In Interfaces & Routing>Interfaces>Hardware
What does the "link mode" say? Is auto negotiation: on or off?
Is Intrusion Protection on or off? Maybe too many rules could be slowing your traffic.
Which speed do you reach with a PC connected to the AP-port by wire?
Systema Gesellschaft für angewandte Datentechnik mbH // Sophos Platinum PartnerSophos Solution Partner since 2003 If a post solves your question, click the 'Verify Answer' link at this post.
Yeah. I already accepted the fact that AP15 is really not a good device.