Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 6 subscribers
  • Views 330 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos RED60 with 9.7 UTM Native vlan issue

seroal

Hi,

just a quick question. I wanted to replace 1:1 a RED15 with a RED60. As we replaced the devices and adapted the configuration. We used default Switch Mode in RED settings. After that only the untagged/native vlan worked. Is there a total different behaviour when it comes to native vlan behaviour?

Is it necessary to use trunk port mode with RED60 when using multiple vlans?

Is this different behaviour documented somewhere?

Thanks,

Sebastian



This thread was automatically locked due to age.
  • 0

    RED15 is not VLAN-aware. It is a nice goody we have tagged packets after passing the RED15.
    With RED60 you have to configure the VLAN function for every port.


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Unfiltered HTML