Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 24 replies
  • Answers 2 answers
  • Subscribers 8 subscribers
  • Views 4613 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Firmware Up2Date installation failed - after upgrade to UTM 9.709-3

Daniel Huhardeaux

Hi list,

with previous version I had 95% up2date failture from UTM, message being all 5 servers not responding. I updated manually the 2 FW version before this one. Now that I installed 9.709-3 version, I get tones of

Firmware Up2Date installation failed: IPS pattern installation was not successful but will keep trying to install. During this time IPS might not be active. Please inspect the UTM if you keep getting this message!
Please check the up2date log file for detailed information

Also, the pattern version stay since ages at 205945 - Your patterns are up to date which is false based on othe UTM.

This version is a Home version. On other UTM (with licences) I face the same problem that up2date never show up new firmware version, have to execute them manually.

The Home version is running ipv4 and ipv6, others only ipv4.

Thanks for any hint

Daniel


This thread was automatically locked due to age.
Parents
  • 0

    Hallo,

    was sagt denn das up2date-log ?


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

  • 0 in reply to dirkkotte

    Logs:

    2022:02:25-18:44:53 guava audld[26056]: 3. Modules::Audld::Authentication::start:68() /</sbin/audld.plx>Modules/Audld/Authentication.pm
    2022:02:25-18:44:53 guava audld[26056]: 4. main::main:187() audld.pl
    2022:02:25-18:44:53 guava audld[26056]: 5. main::top-level:40() audld.pl
    2022:02:25-18:44:53 guava audld[26056]: |=========================================================================
    2022:02:25-18:44:53 guava audld[26056]: id="3703" severity="error" sys="system" sub="up2date" name="Authentication failed, no valid answer from Authentication Servers"
    2022:02:25-18:44:53 guava audld[26056]:
    2022:02:25-18:44:53 guava audld[26056]: 1. Modules::Logging::alf:100() /</sbin/audld.plx>Modules/Logging.pm
    2022:02:25-18:44:53 guava audld[26056]: 2. Modules::Audld::Authentication::start:72() /</sbin/audld.plx>Modules/Audld/Authentication.pm
    2022:02:25-18:44:53 guava audld[26056]: 3. main::main:187() audld.pl
    2022:02:25-18:44:53 guava audld[26056]: 4. main::top-level:40() audld.pl
  • 0 in reply to dirkkotte

    I connect to UTM and ran audld.plx -level d as root from command line. In out put I see

    >>> Modules::Audld::LocalRestriction::_seek_own_country::130()
    Could not connect to Server us1.utmu2d.sophos.com (status=500 Can't connect to us1.utmu2d.sophos.com:443 (timeout)).

    >>> Modules::Audld::LocalRestriction::_seek_own_country::130()
    Could not connect to Server us2.utmu2d.sophos.com (status=500 Can't connect to us2.utmu2d.sophos.com:443 (timeout)).

    >>> Modules::Audld::LocalRestriction::_seek_own_country::130()
    Could not connect to Server sg1.utmu2d.sophos.com (status=500 Can't connect to sg1.utmu2d.sophos.com:443 (timeout)).

    >>> Modules::Audld::LocalRestriction::_seek_own_country::130()
    Could not connect to Server eu1.utmu2d.sophos.com (status=500 Can't connect to eu1.utmu2d.sophos.com:443 (timeout)).

    >>> Modules::Audld::LocalRestriction::_seek_own_country::130()
    Could not connect to Server eu2.utmu2d.sophos.com (status=500 Can't connect to eu2.utmu2d.sophos.com:443 (timeout)).

    Which are the errors shown in previous UTM version. That mean that problem is the same that I had since monthes (95% of the time I saw this error) and that with the last version the message is just another one. Bad.

    host us1.utmu2d.sophos.com
    us1.utmu2d.sophos.com has address 54.214.16.252
    us1.utmu2d.sophos.com has IPv6 address 2a01:729:16e:10:ff:0:36d6:10fc

    or

    host eu1.utmu2d.sophos.com
    eu1.utmu2d.sophos.com has address 79.125.21.244
    eu1.utmu2d.sophos.com has IPv6 address 2a01:729:16e:10:ff:0:4f7d:15f4

    which means not a DNS error. CIsco router in bridge mode, UTM is has direct connection to Internet. The problem arise with 9.708.6, was working well with previous version.

  • 0 in reply to Daniel Huhardeaux

    Well, you missed the point.  Ping != DNS resolution.  That is ICMP_ECHO requests being fulfilled or not fulfilled. It will use hosts file information, being DNS cache, and thus pings the last known IP.  The reply is just the TTL response of the last known IP address.

    So no, ICMP doesn't equate to DNS directly. I also said 'possibly', not 'definitely'.

    At any rate, yes you have an issue with Up2Date, and others do as well (pattern updates not working correctly) as outlined in other posts.

    The later post you made is why I also previously stated that we needed more information from your logs:

    Daniel Huhardeaux said:
    >>> Modules::Audld::LocalRestriction::_seek_own_country::130()

    I don't know if that reads the same is how I am interpreting it because I've not seen this before, but it reads like there is a restriction in place of where you can get your Up2Date files, and maybe why your failure % is so high.  I don't know what country your UTM is in.  Could be reaching out to other remote domains because the one you would normally get your Up2Date is unavailable?  Dirk or someone else might know more on that.

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

  • 0 in reply to Amodin

    UTM is in France. I setted up another server with UTM9 on the same location *WITHOUT* ipv6 and being _behind_ the faulty UTM: up2date works without problem . Please notice that error is "500 timeout" and host cmd shows the -I hope- right IPs.

    Is there a way to force ipv4 for up2date ?

  • 0 in reply to Daniel Huhardeaux
    Daniel Huhardeaux said:
    Is there a way to force ipv4 for up2date ?

    Good question.  I wonder if you can create a Network DNS Host object with the IP information on EU1 and EU2 sites, and add them to your exceptions (whitelist them)?  Maybe a workaround for an issue related to the UTM?

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

  • 0 in reply to Amodin

    Will try to find a way for this.

    Another one: up2date is setup to check daily or all 15minutes for pattern. Message I have are all 5 minutes each half hour which means that during the other half hour it's working as it should.

    Another one: I see from host command that usX.utmu2d.sophos.com and euX.utmu2d.sophos.com doesn't have ipv6 address, those listed above are from nat64 on my network.

    Pretty sure that problem comes from the 2 above points: each half hour up2date works with ipv4 => no message, the second one with ipv6 => errors

    sophos.com without ipv6 ? Hmm ... 

  • 0 in reply to Daniel Huhardeaux

    Salut Daniel,

    This issue seems like it would be of interest to Sophos Support.  Qu'est-ce-qu'ils disent?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    Salut Bob. No feedback, even from French Sophos distributor. Should I remove ipv6 ? ;) Vaut mieux en rire qu 'en pleurer ...

  • 0 in reply to BAlfson

    With the monthly report I saw that in februar up2date had 4 successfull connections for 3554 failures. This mean that I received 3554 emails !

  • 0 in reply to Daniel Huhardeaux

    Resultat sans IPv6, Daniel?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    Bob, from last week Weekly Executive Report:

    Up2Date :  
    Succès des requêtes 3
    Échec des requêtes 425
    Mises à jour du firmware installées : 0
    Mises à jour du modèle installées : 0

    which means 3 times successfull. For pattern version I have:

    Version des listes de définitions actuelle : 205945
    Dernière version des listes de définitions disponible : 207042

    but the 207042 version never gets installed, even manually.

    As already told:
    . another server in the same LAN same UTM version but without ipv6 gets his update without problem
    . the problem appears with version 9-709.3

    Cheers

Reply
  • 0 in reply to BAlfson

    Bob, from last week Weekly Executive Report:

    Up2Date :  
    Succès des requêtes 3
    Échec des requêtes 425
    Mises à jour du firmware installées : 0
    Mises à jour du modèle installées : 0

    which means 3 times successfull. For pattern version I have:

    Version des listes de définitions actuelle : 205945
    Dernière version des listes de définitions disponible : 207042

    but the 207042 version never gets installed, even manually.

    As already told:
    . another server in the same LAN same UTM version but without ipv6 gets his update without problem
    . the problem appears with version 9-709.3

    Cheers

Children
Unfiltered HTML