This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM Update 9.709 - no problems

Installed UTM Update 9.709 manually in five differenet locations now, all sizes of networks and systems.

Running several days now and no problems so far.

Link: https://community.sophos.com/utm-firewall/b/blog/posts/utm-up2date-9-709-released



This thread was automatically locked due to age.
Parents
  • I have installed the firmware 9.709-3 on 5 different boxes, all have a noticeable increase in CPU usage.

    Does anyone know of services that is being activated in this version, or anything else that might be the culprit of this ?

  • There were reports from a couple of prior updates ago about CPU usage but seemed to be related to automatic updating of patterns.  But, nothing of note that I have seen reported or heard about with this specific update.

    9.710-1 is out now too, and there was nothing there of note about CPU.

    You may want to look at your UTM and see what's taking up so much CPU.

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

Reply
  • There were reports from a couple of prior updates ago about CPU usage but seemed to be related to automatic updating of patterns.  But, nothing of note that I have seen reported or heard about with this specific update.

    9.710-1 is out now too, and there was nothing there of note about CPU.

    You may want to look at your UTM and see what's taking up so much CPU.

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

Children
No Data