Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 6 subscribers
  • Views 739 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Uplink / Multipath

Martin Seidel

Hallo,

my uplink failover didn't work. One DSL Channel (WAN.COLT) had a download rate of 0.1 Mbit/s (instead of 1 Gbit/s). There should be a failover to WAN.QSC but it wasn't activated so I pulled the DSL Cable off the Router. Can you please correct my Configuration?

I changed from

WAN.COLT 100 / WAN.QSC 0

to

WAN.COLT 50 / WAN.QSC 50

(WAN.COLT error is because I pulled the DSL cable. Since it was plugged in I had ping timeouts, in about every 5th ping. Since I unplugged the cable it was stable)



This thread was automatically locked due to age.
Parents
  • 0

    Failover is for lost connection ... not for bad connection ... unfortunately.
    Your configuration looks ok.
    Possible i would shorten the "persistence timeout"


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Reply
  • 0

    Failover is for lost connection ... not for bad connection ... unfortunately.
    Your configuration looks ok.
    Possible i would shorten the "persistence timeout"


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Children
Unfiltered HTML