SSL VPN

Hi Radu Mirea,

Thank you for reaching out to the Community! 

Did you configure a firewall rule for your LAN to the SSL VPN network? 

What type of SSL VPN did you configure? Is it a split tunnel or a full tunnel? 

Thanks,

Hi,

Here's my Sophos and network configuration:

Internet - Router - Sophos - LAN

Router: 192.168.0.0/24

Sophos: 

WAN 192.168.0.WAN / 255.255.255.0 / 192.168.0.RG (RG - Router Gateway)

LAN 192.168.0.LAN / 255.255.255.0

Main Office: 192.168.0.x / 255.255.255.0 / 192.168.0.RG

SSL VPN Pool: 10.242.0.0

Thank you.

Hi Radu Mirea,

Thank you for providing the screenshots. 

Can you add a new firewall rule for your internal network to the SSL VPN network for testing and see if that helps? 

Thanks,

I have created the rule (local network to SSL VPN) and still no connection.

Hello Radu,

this catches my atttention:

WAN 192.168.0.WAN / 255.255.255.0 / 192.168.0.RG (RG - Router Gateway)

LAN 192.168.0.LAN / 255.255.255.0

You have two distinct interfaces/segments in the same IP-range. This will never work correctly, because your Sophos will not know, where to route those packets destined for "LAN=internal"

Hi,

Main office has 192.168.0.0/24. I do not have any other class. If WAN will be in 192.168.1.WAN and LAN 192.168.0.LAN, it will be ok?

YES.

This means to modify entire network because 192.168.1.x cannot communicate with 192.168.0.x

This means to modify entire network because 192.168.1.x cannot communicate with 192.168.0.x

Hello Radu,

I don‘t understand that.

if WAN is your transfer net from Sophos to router, where is the problem?

And of course, both private nets can communicate with each other. This can be controlled with firewall rules.