Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 1 reply
  • Subscribers 5 subscribers
  • Views 4014 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM SSL VPN: SENT CONTROL [ad_username]: 'AUTH_FAILED' (status=1) after change in SSL Profile

husme

Hi all

I have a VPN Profile with a usergoup under "Users and Goups" and Group of Computers under "Local Network".

All was working fine for several weeks.

Now, I had to change the Settings for two users and removed them from the usergoup and setted up a new Profile for this users.
After that, these users get the error "SENT CONTROL [ad_username]: 'AUTH_FAILED' (status=1)" when they try to establish the VPN.


Any suggestions what to do?

Martin



This thread was automatically locked due to age.
  • +1

    Sorry for the circumstances.

    I just found out, that the user group was also used for OTP under Authentication Settings.

    So, after removing the users from the group, I had to manually add them to Authentication Settings under OTP.

     

    All the best
    Martin

Unfiltered HTML