This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Zoom Phone with SG125 (UTM 9)

Trying to configure ZOOM Phone services (via there Application) on UTM 9. Had Sophos techs open the ports and added all the IP addresses required by Zoom. For some reason this still doesn't work. Has anyone configured Zoom Phone service to work with Sophos SG125 (UTM 9)? Please help!

List of IP addresses:

8.5.128.0/24
64.211.144.0/24
103.122.166.0/23
109.94.160.0/22
120.29.148.0/24
147.124.96.0/19
162.12.232.0/22
192.204.12.0/22
207.226.132.0/24
209.9.211.0/24
209.9.215.0/24
213.19.144.0/24
213.19.153.0/24
213.244.140.0/24

Ports:
TCP - 5090:5091
UDP - 5090
UDP - 20000:64000

I have tried everything and cannot figure this out.


This thread was automatically locked due to age.
Parents Reply
  • Recently started using zoom meeting here.  It would not connect unless the following were exempted.   Maybe zoom phone is using these also?

    Had to add the following to the http proxy exceptions to allow it to connect.

    • ^https?://([A-Za-z0-9.-]*\.)?zoom\.us
    • ^https?://([A-Za-z0-9.-]*\.)?zoomsvr\.us

Children
  • Just replying back for those who might run into this problem.

    So after spending countless hours and days trying to figure out why Zoom phone would not work. It came down to a simple setting.

    Set the MTU setting to 1500 (From 1440) on both Internal and External Networks.

    It all works now. No other settings required.

     

    It just works!