Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 5 subscribers
  • Views 2707 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM 9.700-5 download

Peter-Paul Gras

Is UTM 9.700-5 available for download? Mine crashed. I started rebuilding from:

  • asg-9.605-1.1.iso,
  • adding license,
  • upgrade to UTM 9.700-5 
  • restoring from backup 

doesn' t work. The machine keeps hanging in the restoring of the backup and never comes back up again.

So if i could download a UTM 9.700-5  image i can restore the backup during initial isetup.
Any thoughts or help would be greatly appreciated.

Thnx, Peter-Paul



This thread was automatically locked due to age.
Parents
  • +1

    Hi  

    ISO for UTM 9.700-5 is not yet available. You can always check it here Sophos UTM Downloads. The latest available ISO is 9.605 and you can download the next update u2d-sys-9.605001-700005.tgz.gpg from this up2date server to reach 9.700-5.

    Further, can you make sure that you keep the Interfaces the same as available in your backup? Please configure as many interfaces as available in your backup config and also make sure that your device's pattern updates are latest, allow UTM to do the pattern updates before restoring the backup. Try to restore the backup after doing this. It should work.

    Regards

    Jaydeep

  • 0 in reply to Jaydeep

    It's the same hardware, all the interfaces are exactly as they were withe the working UTM instance.

    Again followed the procedure as you as described, it's just not working. I have no idea why, am going to give up on UTM...

     
    SFVH (SFOS 20.0.0 GA-Build222) - Last (re)boot on November 6th  2023
    Asus H410i-plus - Pentium 6605 Gold - 250GB M.2 PCIe NVMe SSD - 8GB - 3 ports
    [If any of my posts are helpful to you please use the 'Verify Answer' link]
Reply
  • 0 in reply to Jaydeep

    It's the same hardware, all the interfaces are exactly as they were withe the working UTM instance.

    Again followed the procedure as you as described, it's just not working. I have no idea why, am going to give up on UTM...

     
    SFVH (SFOS 20.0.0 GA-Build222) - Last (re)boot on November 6th  2023
    Asus H410i-plus - Pentium 6605 Gold - 250GB M.2 PCIe NVMe SSD - 8GB - 3 ports
    [If any of my posts are helpful to you please use the 'Verify Answer' link]
Children
No Data
Unfiltered HTML