This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Setup UTM 9 Home Edition advise

Hi all,

I have a fanless mini PC running UTM 9.6

In my Home enviroment, I want to use this behind my router, current basic setup shown below

The new setup should be something like this:

The UTM was installed with the basic settings, so no tweaking is done yet.

When setting my network up as shown in the second picture I could not connect to the internet from behind the UTM, internal connection is no issue.

When connecting a device to the Router, I had, of course, internet connection but could not connect to anything behind the devices.

So my question, what i'm doing wrong or where should I look.

 

thankx and have a happy new year!



This thread was automatically locked due to age.
Parents
  • Looks like your subnets are having an issue, bit of a conflict going on there.

    I would first use two separate subnets, say 192.168.1.0 & 192.168.2.0.

    but having this sort of configuration  may involve double natting, which can be a pain to manage and maintain.

    XG & UTM Architect (Systems: XG v18 & UTM 9.7 - Virtual, HW & SW)
    Curious enough to take it apart, skilled enough to put it back together, Clever enough to hide the extra parts when I'm Done!

  • This was indeed the issue, when putting the router in a different subnet al works fine.

    Thanks for the help guys.

Reply Children
No Data