Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 12 subscribers
  • Views 8632 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Unequal Broadcast of Bandwidth for ap 50's (NO TRAFFIC SHAPING RULE).... XG

Proudmore
Hi folks
 
I just encountered a weird problem regarding sophos AP.
 
This is the Scenario.
 
When we connect an AP into UTM.. Our network became slow despite nobody was connected to that AP. But when we try to unplugged the AP, network turns into Normal speed/bandwidth..
 
 
What was the cause and solution for this problem..?
 
 
thank you


This thread was automatically locked due to age.
Parents
  • 0

    Hi,

     

    can you post the configuration differences between the two setups? Can you post a small network diagram? Furthermore, what is the test you use for measuring bandwidth/speed? 

     

    Kind regards,

     

    Dirk Bolte

  • 0 in reply to DirkBolte

    let me rephrase my question sir..

     

     

     

    we have 2 aps connected into the same XG appliance.

     

    one ap (AP 1) is connected/assigned near XG appliance and the second ap (AP 2) is connected/assigned more distant from XG.

     

    The problem is

    when AP1 is connected alone in XG appliance network speed/bandwidth is normal but then when both aps are connected, network became slow (no one is connected to AP2).

    You must unplugged AP2 in order to make the network normal again.

     

    Thank you

Reply
  • 0 in reply to DirkBolte

    let me rephrase my question sir..

     

     

     

    we have 2 aps connected into the same XG appliance.

     

    one ap (AP 1) is connected/assigned near XG appliance and the second ap (AP 2) is connected/assigned more distant from XG.

     

    The problem is

    when AP1 is connected alone in XG appliance network speed/bandwidth is normal but then when both aps are connected, network became slow (no one is connected to AP2).

    You must unplugged AP2 in order to make the network normal again.

     

    Thank you

Children
Unfiltered HTML