Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 3 replies
  • Subscribers 12 subscribers
  • Views 2043 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AP Connection Lost after TX Settings change

MarcHurrelmann

Hi

While testing some connections we play with TX settings and set them to 75%. After rechange to 100% the networks gone

down and didn´t come up again. Central shows 100% OK for more than 30min. After this time Central change to offline. We try

to boot the AP.... nothing. Looking into the paket filter the AP is still online an send pakets UDP to 5-10 NTP Server every 20sec????

It will never send a Paket to the Provisioning Server again on Port HTTPS. From Time to Time its restart itselfs but nothing happens. 

Looks like we need to flash AP again? Any other idea?

Best regards


Marc



This thread was automatically locked due to age.
Unfiltered HTML